Threaded drum adapter designed to suit the threaded port on plastic barrels such as 205L AdBlue barrels. 56 X4 Male Thread to a 3/4″ BSP female. Suitable for use with AdBlue, Detergent, Anti Freeze, Diesel, Oil, Water & more. 

• 56 x 4 Trisure thread 
• 3/4″ female BSP 
• Polypropylene 
• Sealing ring 
• Single one piece mould 
•  

Plastic Barrel Thread

The 56 x 4 trisure thread is commonly found on AdBlue barrels, plastic drums and other plastic containers. This adapter converts this thread type to a more usable BSP thread, which can be used to connect taps, hose kits or suction kits. 

What can it be used for?

This adapters allow barrels to be placed on their side and used as a gravity flow through a smaller plastic tap or with a hose kit. They can also be used to fit hose tails to barrels or other drums with the same thread. Ideal for use with AdBlue, Detergents, Anti Freeze and other liquids. 

56 X 4 Trisure Thread

This thread type is most commonly found on plastic barrels such as the 205 litre AdBlue Barrels and other plastic containers. This adapter converts this outlet to a 3/4″ BSP female threaded port, making it easier to connect fittings, hoses and taps to drums and barrels 

The post 56 x 4 Drum Thread Adapter appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

These IBC Adapters are designed to fit standard DIN 61 IBC tanks. Screwing directly onto the bottom outlet of an IBC tank, they provides a secure hose tail connection for either a 1.5-inch hose or a 2-inch hose. Perfect for transferring a wide range of liquids including AdBlue, water, oil, diesel, HVO, antifreeze, and other water-based Liquids.

• DIN 61 IBC Thread 
• Inner sealing ring 
• Polyethylene plastic 
• 1.5″ OR 2″ Hose tail
• Ribbed tail piece   

Ideal for Gravity Flow Kits

These IBC adapters can be used with gravity-fed hose kits. Once fitted to the tank, simply push the required hose onto the hose tail. When combined with a hose and nozzle, this provides a cost-effective and efficient way to dispense AdBlue, water, or oil from an IBC tank without the need for a pump. Check out our IBC Hose Kits available with 4m or 6m hoses designed for AdBlue.

Wide Liquid Compatibility

Manufactured from high-grade plastic, these fittings are corrosion-resistant and suitable for use with:

• AdBlue

• Water

• Diesel

• Oil

• HVO

• Antifreeze

• Other water-based fluids

Alternative Sizes Available 

These fittings are also avaiable in smaller sizes to suit 1″ and 3/4″ hose, click here or see the related products below 

Fast Delivery & Free Shipping Options

Order before 3pm for next-day nationwide delivery on all AdBlue accessories, pumps, and kits. Free delivery on orders over €100.

The post IBC Hose Tail Fitting LGE appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

High-quality AdBlue filter with 20-micron rating and transparent bowl for easy monitoring. Ensures clean, contaminant-free AdBlue for optimal SCR system performance. Ideal for use with electric AdBlue pumps. 

• Max flow rate 60 l/min
• 1″ Inlet & outlet ports
• 20 micron filter 
• Transparent bowl 
• Polypropylene filter 
• Optional filter wrench 

Filter Specification

This high-performance 20 Micron AdBlue Filter features a max flow rate of 60 L/min, 1″ inlet and outlet ports, and a 20-micron polypropylene filter for superior contaminant removal. The transparent bowl allows easy visual inspection, making it ideal for reliable AdBlue filtration. Perfect for industrial and automotive use, this filter ensures clean fluid flow and extended equipment life.

What Does It Fit? 

This AdBlue filter is suitable for use with any AdBlue pump with a flow rate of up to 60 l/min. It can fitted directly to the inlet of any PIUSI AdBlue pump. These include pumps such as the 230 volt pump only, 12 volt pump and all AdBlue dispensing Kits.

20 Micron Polypropylene Cartridge 

The inner cartridge filter on the AdBlue Filter is made from a high grade polypropylene and is designed to filter down to 20 microns. This ensures that the AdBlue being dispensed or transferred is of a high quality.

How Often Should an AdBlue Filter Be Changed?

AdBlue is typically a high-purity liquid and less susceptible to contamination, allowing filters to last longer. However, it’s recommended to replace this filter annually to maintain optimal pump performance and avoid unexpected failures. 

The post AdBlue Filter appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

Fully Stainless 90 degree bend with 1″ male x 1″ female BSP threads. Manufactured from a high grade 316 stainless, allowing it to be used safely with AdBlue, Anti-freeze, oil, Water and other liquids. 

• 1″ female BSP thread
• 1″ Male BSP thread
• 90 degree bend
• Stainless Steel

Stainless 90 Material

Made of high-quality stainless steel for superior corrosion resistance and durability. Precision-machined threads ensure a tight and secure fit, preventing leaks and suitable for use in industries dealing with water, chemicals, oil, and gases.

Threaded BSP Ends 

Male -Female BSP threaded ends ensure this fitting is easy to install and provides a secure pipe connection. Stainless steel is designed for durability and long lasting life. 

The post Stainless 90 Male – Female Bend appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

Fully stainless steel 90 degree bend with female x female BSP threaded ports in 1″. Manufactured from a high grade 316 stainless, allowing it to be used safely with AdBlue, Anti-freeze, oil, Water and other liquids. 

• 1″ female BSP threads
• 90 degree bend
• Stainless Steel

Key Features of Stainless Steel Female-Female Bend

Material

Made of high-quality stainless steel for superior corrosion resistance and durability. Precision-machined threads ensure a tight and secure fit, preventing leaks and suitable for use in industries dealing with water, chemicals, oil, and gases.

Threaded BSP Ends 

Female-Female BSP threaded ends ensure this fitting is easy to install and provides a secure pipe connection. Stainless steel is designed for durability and long lasting life. 

The post Stainless 90 Female Bend appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

PIUSI 90 Degree bend with a 3/4″ hose tail designed for use with AdBlue. This fitting comes with wit ha 1″ x 1″ male joining nipple, which allows it to be joined to either a female connection or a male connection, by removing the nipple. 

• Internal sealing ring
• 3/4″ hose tail
• 1″ x 1″ nipple 
• 1″ female BSP collar

Where is it used?

This 90 degree fitting is best suited in applications where the hose needs to come in 90 degrees to the inlet or outlet of a pump, hose or nozzle. This allows greater flexibility when fitting an AdBlue system. The 3/4″ hose tail on the other end is widely compatible with the standard AdBlue hose available. 

Joining Nipple For AdBlue 

This fitting comes with a 1″ x 1″ male nipple, which can increase the compatibility of this fitting to accommodate any 1″ female thread, as well as suiting any male thread without the nipple.

Liquid Suitability 

Manufactured entirely from plastic it ensures that the fitting is corrosive resistant and fully compatible with AdBlue. It can also be used with diesel, oil, water and non corrosive liquids. This fitting is also available without the nipple, click here to view 

The post Hose Tail Fitting 90 Degree c/w Nipple appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

SCR Cleaner is designed to actively solve AdBlue crystallization in injectors and throughout the SCR system. This 5 litre drum is perfect for mixing into a bulk storage tank or for divining up to mix in smaller quantities

• Cleans entire system
• Reduces crystallization
• Enhances performance
• Reduces SCR problems
• Cleans Injectors
• 5L treats 2,000L of AdBlue

Prevents Crystallization & Optimize Performance

Ceroil’s advanced formula is designed to eliminate and prevent buildup caused by crystallization in AdBlue injectors and SCR catalysts. This powerful cleaner dissolves deposits, keeping your vehicle running smoothly and efficiently. Regular use helps maintain peak performance and prevents costly engine damage.

Direct Treatment

Pour the full 100ml bottle directly into the AdBlue tank, preferably when the fluid level is low, ensuring a deep clean and restoring system efficiency. 100 ml of additive treats 40 litres of AdBlue

Effective Cleaning – Breaks down and prevents crystallization, keeping injectors and catalysts free from blockages.
Performance Boost – Ensures optimal engine function and prevents efficiency loss.
Cost-Effective Maintenance – Helps avoid expensive repairs and potential engine failures.
Easy Application – Simple dosing instructions for both intensive treatment and routine upkeep.

Protect your vehicle’s AdBlue system with our AdBlue Injector Cleaner & SCR Catalyst Maintenance Solution. Keep your engine running at its best with regular, preventative care.

The post SCR AdBlue System Cleaner 5 Litre appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

SCR Cleaner is designed to actively solve AdBlue crystallization in injectors and throughout the SCR system. These 100 ml shot bottles are designed to treat 40 litres of Adblue, ideal for mixing directly into the AdBLue tank on vehicles. 

• Cleans SCR system
• Reduces crystallization
• Enhances performance
• Reduces SCR problems
• Cleans Injectors

Prevents Crystallization & Optimize Performance

Ceroil’s advanced formula is designed to eliminate and prevent buildup caused by crystallization in AdBlue injectors and SCR catalysts. This powerful cleaner dissolves deposits, keeping your vehicle running smoothly and efficiently. Regular use helps maintain peak performance and prevents costly engine damage.

Direct Treatment

Pour the full 100ml bottle directly into the AdBlue tank, preferably when the fluid level is low, ensuring a deep clean and restoring system efficiency. 100 ml of additive treats 40 litres of AdBlue

Effective Cleaning – Breaks down and prevents crystallization, keeping injectors and catalysts free from blockages.
Performance Boost – Ensures optimal engine function and prevents efficiency loss.
Cost-Effective Maintenance – Helps avoid expensive repairs and potential engine failures.
Easy Application – Simple dosing instructions for both intensive treatment and routine upkeep.

Protect your vehicle’s AdBlue system with our AdBlue Injector Cleaner & SCR Catalyst Maintenance Solution. Keep your engine running at its best with regular, preventative care.

The post SCR AdBlue System Cleaner 100ml appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

The Elafix Tank Adapter safeguards against the misfiling of AdBlue when combined with a magnetic Auto nozzle. The magnetic adapter is designed to universally fit diesel tanks on trucks, vans, cars & other vehicles and can be retro fitted or used as a direct replacement for an existing magnetic. 

How does it work?

Some AdBlue auto nozzles are magnet activated, and only allow dispensing when it passes through a elafix female magnet adapter like this one, once the spout of the nozzle passes through the elafix adapter, both magnets interact and enables the auto nozzle to dispense AdBlue. This prevents AdBlue being dispensed into the wrong tank and only allows dispensing into tanks that contain an elafix magnet.

Elafix 40 AdBlue Vehicle Tank Adapter

• 19 mm internal diameter 
• Universally compatible with PUISI and ZVA Auto Nozzles 
• Operating Temperature: -20°C to +85°C
• Universal tank fitment 

Mistakenly filling AdBlue into the wrong tank can be costly and damaging to fuel systems and should be avoided, a magnetic elafix adapter fitted to the AdBlue tank combined with a magnetic auto nozzle, ensures that AdBlue can never be dispensed into the wrong tank. 

Have a look at our range of AdBlue nozzles by clicking here 

FREE delivery on all orders over €100 with next day nationwide delivery if ordered before 3pm

The post Elafix Tank Adapter appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

This 2″ BSP plastic adapter has a 2″ trisure male thread and a 2″ Female BSP thread.  Most commonly used with plastic 205 litre barrels such as the 205L AdBlue barrel or smaller drums, which comes as standard with the trisure thread. 

• 2″ Trisure male thread
• 2″ BSP thread
• Made from plastic 

Suitable for use with a wide range of liquids such as AdBlue, Antifreeze, Chemicals and more;

Where is it used?

The Trisure adapter is most commonly used on 205 Litre AdBlue barrels. It converts the coarse 2″ trisure thread to a more usable 2″ BSP thread. It is also used on various oil drums and containers.

What Products is it used with?

This plastic fitting is required if you are using a 2″ BSP pump in a standard plastic barrel or drum which has a much coarser thread known as trisure. This adapter is required when using our AdBlue lever pump GZ44185 

The post 2” BSP X Trisure Thread Adapter appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

Plastic 90 degree bend with two 1″ BSP female collars designed for use with AdBlue. 

• Internal o-ring on both ends
• 1″ female collar both sides
• 1″ BSP Thread
• 90 degree bend
• Suitable for AdBlue 

90 Degree Bend Fitting 

These fittings provide an easy, simple and effective way of joining hoses, meters or pumps together where a 90 bend is required. They are designed to fit perfectly into any PIUSI pump or flow meter thanks to the internal sealing ring

The post Hose Tail 90 Bend Fitting appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

This Plastic 2″ BSP male adapter bush is designed to suit 2″ BSP threads and comes with either a 1″ or 3/4″ female inner thread.

• 2″ BSP male adapter
• 2″ Male thread BSP
• 1″ or 3/4″ inner thread BSP
• Manufactured from plastic

Reducing bush 

These reducing bushes are prefect for converting 2″ BSP down to a smaller BSP size. Suitable for use with AdBlue, water & other liquids. Made from highly durable plastic ensuring a high chemical resistance. 

Plastic 2″ Adapter

A 2″ BSP adapter can be used in various applications such as reducing the size of a tank outlet, busing down pipework or pump outlets. 

Chemical Resistance 

As these fittings are made entirely from plastic they have a very high chemical resistance allowing for them to be used with various liquids such as diesel, oil, AdBlue, Antifreeze, Detergent, water and much more.

The post Plastic BSP 2″ Bush appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

The PIUSI AF2 Suction kit comes supplied with an threaded adapter, a 3/4″ hose tail and suction tubing to suit 205 litre barrels. The AF2 coupling ensures that the AdBlue is not contaminated while being transferred and ensures a clean transfer from the barrel to the pump with no loss or spillages. 

• Suitable for AdBlue 
• 3/4″ hose tail 
• Extendable suction tubes 
• Trisure thread or 2″ BSP adapter
• Made from polypropylene plastic

AdBlue Barrel Suction kit

If you are looking to pump from an AdBlue barrel or any other tank the AF2 adapter from PIUSI provides a safe and clean extraction solution to connect to any pump. The adapter comes in two threaded sizes which include a 2″ BSP thread and a 2″ trisure thread. The trisure thread is the european standard on blue plastic AdBlue barrels. 

How does it work?

The tubes are joined together to the desired length and can also be cut to suit smaller tanks or barrels. They are then pushed onto the receiving end of the AF2 adapter and screwed into place. This then allows you to connect a 3/4″ hose to the hose tail on the coupling. 

All PIUSI AdBlue accessories are a perfect fit for all PIUSI pumps, view our full range of AdBlue Pumps

The post AF2 Suction Kit appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

This Plastic 1 inch Plastic Lever Valve is suitable for use with a range of liquids. Manufactured from a complete plastic body with a stainless ball valve allows it to be used safely with AdBlue, Anti-freeze, oil, Water and other water based liquids. 

1 inch female / female lever valve with tap

• 1 inch female BSP thread
• Inline ball shut off valve
• Plastic body & stainless steel ball valve
• Lever style tap 

Use with Water Pumps

If you need a lever valve for a water harvesting, rain water collecting or irrigation system this valve is well suited. With 1″ female BSP fittings on either side, it can easily retro fitted in-line, to a pump or at the end of the hose.

Suitable for AdBlue 

Due to the chemical nature of AdBlue, it requires specific requirements when it comes to handling. This Plastic Lever Valve is manufactured entirely from plastic, with a stainless steel ball valve ensuring that the parts in contact with AdBlue are safe and corrosion resistant.

Prevent Spillages

A Lever valve ensures the source of the liquid is fully isolated ensuring no spillages or drips. Making it perfect for use with AdBlue tanks and Water tanks. It also makes servicing and changing parts much easier, turning off the supply of liquid allowing to you change or service your water pump or AdBlue pump without any liquid flowing freely through the system.

Looking to get this is a hurry? we have next day delivery if your order is placed before 3PM. 

The post Plastic Lever Valve appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

90 Degree bend with a 1″ female collar and a 3/4 inch hose tail designed for use with AdBlue. The 1″ collar fits all PIUSI pumps, meters and even dispensing nozzles. 

• Internal sealing ring
• 3/4″ hose tail
• 1″ female BSP collar

Where is it used?

This fitting is best suited in applications where the hose needs to come in 90 degrees to the inlet or outlet, allowing for greater flexibility when fitting an AdBlue system. The 3/4″ hose tail on the other end is widely compatible with the standard AdBlue hose available. 

Manufactured entirely from plastic it ensures that the fitting is corrosive resistant and fully compatible with AdBlue. It can also be used with water and milk. 

The post Hose Tail Fitting 90 Degree appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

This AdBlue hose tail is designed to suit all PIUSI pumps, meters, filters and kits. An essential fitting for connecting a hose to any pump or AdBlue handling component. 

• Internal sealing
• 3/4″ hose tail
• 1″ female collar
• Suitable for AdBlue, water & other liquids

3/4″ Hose tail with 1″ BSP Thread

With a 1 ” Female BSP thread, it connects directly to all 1″ male threaded inlets or outlets and converts them to an easy to use hose tail designed for 3/4″ hose. 

This plastic hose tail is perfect for fitting a hose to any pump, meter or nozzle. Made entirely from plastic ensures it is corrosive resistant and fully compatible with AdBlue

Nationwide delivery on all AdBlue Accessories

The post Hose Tail fitting appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

This IBC Tank Adapter or Drum adapter is used to convert a DIN61 thread to a more common 2″ BSP thread. DIN61 thread is found on the bottom outlet of most standard IBC tanks, drums or other plastic containers. This plastic adapter is suitable for use with AdBlue, water, oil and various other liquids

• DIN 61 female thread
• 2 Inch BSP female thread
• Manufactured from Plastic
• Suitable for AdBlue, Water, Oil, Diesel & other liquids 

Manufactured From Plastic

This fitting is made entirely from plastic, which means it has a very high chemical resistance and can be used with a large range of liquids without any consequences. 

IBC Tank Coarse Thread to Fine Thread

Many IBC tanks and smaller containers come with a DIN 61 thread type which is a coarse thread. This adapter can quickly and cleanly convert it to a more usable 2″ BSP thread. The adapter comes with a sealing ring to ensure to leaks or drips from the IBC outlet.

Next day nationwide delivery on all Accessories, pumps, kits & more if ordered before 3pm. With free delivery on orders over €100.

The post Plastic DIN 61 Adapter appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

IBC Adapter is designed for use with IBC tanks with a standard DIN 61 fitment. These fittings screw directly onto the bottom outlet tap on an IBC tank and provide a hose tail fitting for either a 3/4″ or 1″ hose to be connected. Suitable for use with AdBlue, Water, Oil, Diesel & Other Liquids. 

• DIN 61 IBC thread 
• Inner sealing ring 
• 1″ or 3/4″ hose tail
• Plastic Body suitable for AdBlue, oil, Diesel & other liquids.

Gravity Flow Kits

These IBC adapters can be used for gravity flow hose kits. Once fitted to the IBC tank, the required hose can be simply pushed onto the hose tail. Combined with hose & a Nozzle these adapters provide a very efficient method of getting oil, AdBlue or Water out of an IBC tank where there is no access to a pump. Check out our IBC Hose kit which comes with 4 metres or 6 metres of hose suitable for AdBlue. 

Use with AdBlue Pumps

An IBC Adapter can be used with any AdBlue pump on an IBC tank. By using this fitting you can easily remove and fit to another IBC with no mess or fear of spillages. These are also found in our IBC Pump kits. View our full range of AdBlue pumps here. 

Compatible Liquids

These fittings are made from plastic so are highly resistant to corrosion making them suitable for use with AdBlue, Water, oil, Diesel, HVO, Anti Freeze and other water based liquids

Next day nationwide delivery on all AdBlue Accessories, pumps, kits & more if ordered before 3pm | Free delivery on orders over €100.

The post IBC Hose Tail Fitting appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

Manufactured with an EPDM inner tube, this hose protects fluid purity and ensures safe transfer of AdBlue without contamination. It is compatible with standard PIUSI pump kits and other AdBlue systems using 3/4 inch fittings.

Supplied per metre, it allows you to order the exact length required for your setup.

Key Features

• 3/4 Inch AdBlue Delivery Hose
• Compatible With PIUSI Pump Kits
• Suitable For Most DEF Systems
• 19mm Internal Diameter
• EPDM Inner Tube Construction
• Maximum Pressure 10 Bar
• Supplied Per Metre
• Cut To Required Length Before Dispatch

Designed For Reliable AdBlue Transfer

This hose is ideal if you:

• Need To Replace A Damaged Hose
• Want A Longer Delivery Hose
• Are Installing A New AdBlue Setup
• Maintain Workshop Dispensing Systems
• Operate Agricultural Or Fleet Equipment

It can also be used for milk transfer applications, making it a flexible option across multiple industries.

Built For Irish Working Conditions

Strong, flexible and easy to install, this hose keeps AdBlue dispensing clean and controlled while protecting your equipment from contamination risks.

The post PIUSI AdBlue Delivery Hose 3/4 Inch Per Metre appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.

Plastic hose tails are designed for use with a range of liquids. They come with a 1″ or a 3/4″ ribbed hose tail, allowing them to be used with various hose sizes. The threaded BSP end makes it easy to install them to any pump, nozzle or similar equipment.

• Single Plastic Mold
• Ribbed hose tail
• BSP Thread 
• Suitable for AdBlue, Diesel, Water & more

Hose Tails Suitable for Use with:

• Water 
• AdBlue
• Diesel or HVO
• Clean or waste oil 
• Chemicals 
• Non corrosive liquids

These plastic hose tail fittings are made from a single mold plastic, which ensures they have a high chemical resistance to a range of liquids. 

Nationwide delivery on all AdBlue Accessories, pumps, kits & more 

The post Plastic Hose Tails appeared first on Rotech | Diesel Fuel Management System | Diesel Pumps |.